ZJGH 4"-35 Mpa drilling fluid manifold
Basic Info
Model No.: 2000~20000PSI
Product Description
Product Description 
ZJGH 4"-5000PSI(10,000PSI) Drilling Fluid Manifold consists of Mud Gate Valve, high pressure Union, Tee , Cross, Elbow, High Pressure Hose, pup joint, pressure gauge, etc. The ground valve group adopts the goose shaped tee structure, compact and low in fluid resistance. The rig valve group adopts adaptor spool, which can be directly used as single pipe on site. The high pressure union is made of high strength alloy steel and heat treated. The gate and valve seat are spray welded with hard alloy, which prolongs the life of the valve, reduces the operation torque and prolongs easy opening. The elbow, adaptor, tee, and cross, etc are made of high strength alloy steel and heat treated. The wall thickness is increased to meet the demands of high strength and corrosion resistance. For parts with high precision requirements, special processes are adopted to guarantee the quality. All high pressure bearing parts are hydrostatic tested for strength and seal tested before assembly to ensure quality before delivery.
Installation
1.When installing, first clean the seal surface of the union and the groove of the seal ring, apply grease and get sundries out of the pipe.
2.Check whether all the outer connections are fastened.
3.Parts may be disassembled when handing, clean all the pipelines. Wrap the connecting parts after applying grease to keep sundries out and avoid bumping threads and sealing surface.
Suggestions for use and maintenance:
Inject calcium base grease into the mud pump regularly for maintenance. Check at regular intervals whether the connecting and fastening bolts are loose. Replace the seal immediately in case of leakage at the sealing part. Keep the exterior of the Manifold clean and apply anti-corrosion paint regularly. Note: The mud valve Gate Valve is only intended to open and close the pipe. It's not supposed to be used as the throttle valve in case the sealing face may be damaged. Specifications for Products
Our Services After-Sales Service:
Provide considerate services to minimize clients' worries.
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site
(4) Examine the equipment regularly;
(5) Take initiative to eliminate the troubles rapidly at site;
(6) Distribute the guarantee fittings door-to-door
(7) Provide perfect service;
(8) Provide technical exchanging;
(9) Provide maintenance for big items Company Information 1. GoodSupplier on alibaba , is a credit company.
2. Advanced technology, high quality products and reasonable price!
3. Good service, the customization and trial order are both accepted.
4. A talent and experienced team. Please do not hesitate to inform us your requirement or any special idea. . we work hard for both of our success.
why choose us Advantages we have: A.Experienced oilfield equipment supplier B.Professional design team and department for your service C.Alibaba golden supplier D.7/24 service for you , all the question will be dealed within 24 hours Benefit you get : A.Stable quality -coming from good material and technic B.Lower price ---Not cheapest but the lowest at the same quality C.Good service-satisfactory service before and after sale D.Delivery time-30~45 days for mass production FAQ 1.Are you manufacturer or trader company?
We are manufacturer and we could supply more professional technical services and goods.
2.The goods are new or used, if you will make technical drawing and production plans for us?
All our goods are new ones, the production schedule will offer to you once getting your purchase order.
3.Do you have related inspection equipments?
Yes, our factory is equipment all test equipments, and I could send their pictures and test documents to you.
4. Could you tell me if your price includs the third party inspection charges?
No, our price do not include the third party inspection charge, and we will notice on our Quotation.
5. Where did your products sell out?
United States, Canada, Mexico, Venezuela, Colubia, and other South American Region
Russica, Azerbaijan and Central Asia Countires
UAE, Saudi Arabia and Mddle East Counties
Contact us if you need more details on Drilling Fluid Manifold. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Drilling Fluid Manifold、Drilling Fluid Manifold. If these products fail to match your need, please contact us and we would like to provide relevant information.
ZJGH 4"-5000PSI(10,000PSI) Drilling Fluid Manifold consists of Mud Gate Valve, high pressure Union, Tee , Cross, Elbow, High Pressure Hose, pup joint, pressure gauge, etc. The ground valve group adopts the goose shaped tee structure, compact and low in fluid resistance. The rig valve group adopts adaptor spool, which can be directly used as single pipe on site. The high pressure union is made of high strength alloy steel and heat treated. The gate and valve seat are spray welded with hard alloy, which prolongs the life of the valve, reduces the operation torque and prolongs easy opening. The elbow, adaptor, tee, and cross, etc are made of high strength alloy steel and heat treated. The wall thickness is increased to meet the demands of high strength and corrosion resistance. For parts with high precision requirements, special processes are adopted to guarantee the quality. All high pressure bearing parts are hydrostatic tested for strength and seal tested before assembly to ensure quality before delivery.Installation
1.When installing, first clean the seal surface of the union and the groove of the seal ring, apply grease and get sundries out of the pipe.
2.Check whether all the outer connections are fastened.
3.Parts may be disassembled when handing, clean all the pipelines. Wrap the connecting parts after applying grease to keep sundries out and avoid bumping threads and sealing surface.
Suggestions for use and maintenance:
Inject calcium base grease into the mud pump regularly for maintenance. Check at regular intervals whether the connecting and fastening bolts are loose. Replace the seal immediately in case of leakage at the sealing part. Keep the exterior of the Manifold clean and apply anti-corrosion paint regularly. Note: The mud valve Gate Valve is only intended to open and close the pipe. It's not supposed to be used as the throttle valve in case the sealing face may be damaged. Specifications for Products
The matching drilling machine type | ZJ30,ZJ40,ZJ45,ZJ50,ZJ70 | ZJ90,ZJ120 |
|
Working pressure | 35MPa,52.5MPa | 70MPa |
|
Nominal Diameter | 2”,3”,4”,5” | |
|
Working medium | Oil, gas, water, mud, cement | |
Connection type | Union, Flange | |
Our Services After-Sales Service:Provide considerate services to minimize clients' worries.
(1) Assist clients to prepare for the first construction scheme;
(2) Install and debug the equipment;
(3) Train the first-line operators on site
(4) Examine the equipment regularly;
(5) Take initiative to eliminate the troubles rapidly at site;
(6) Distribute the guarantee fittings door-to-door
(7) Provide perfect service;
(8) Provide technical exchanging;
(9) Provide maintenance for big items Company Information 1. GoodSupplier on alibaba , is a credit company.
2. Advanced technology, high quality products and reasonable price!
3. Good service, the customization and trial order are both accepted.
4. A talent and experienced team. Please do not hesitate to inform us your requirement or any special idea. . we work hard for both of our success.
why choose us Advantages we have: A.Experienced oilfield equipment supplier B.Professional design team and department for your service C.Alibaba golden supplier D.7/24 service for you , all the question will be dealed within 24 hours Benefit you get : A.Stable quality -coming from good material and technic B.Lower price ---Not cheapest but the lowest at the same quality C.Good service-satisfactory service before and after sale D.Delivery time-30~45 days for mass production FAQ 1.Are you manufacturer or trader company?We are manufacturer and we could supply more professional technical services and goods.
2.The goods are new or used, if you will make technical drawing and production plans for us?
All our goods are new ones, the production schedule will offer to you once getting your purchase order.
3.Do you have related inspection equipments?
Yes, our factory is equipment all test equipments, and I could send their pictures and test documents to you.
4. Could you tell me if your price includs the third party inspection charges?
No, our price do not include the third party inspection charge, and we will notice on our Quotation.
5. Where did your products sell out?
United States, Canada, Mexico, Venezuela, Colubia, and other South American Region
Russica, Azerbaijan and Central Asia Countires
UAE, Saudi Arabia and Mddle East Counties
Product Categories : Wellhead Equipments > Drilling Fluid Manifold
Premium Related Products
Other Products
Hot Products
Oilfield API DG SERIES OF HooksAPI cement baskets for cementing toolsAPI standard water swivel for drilling rig/water well drilling swivelAPI YG135, YG170, YG225, YG450 Traveling Hook Block Used for Drilling RigAPI Hammer Union/ Thread Union/ Welding Union/ H2S Welding Union For Oil and gasAPI 5CT steel pipes,oil casing pipeHigh Quality Electric Submersible Pump (ESP) For Oil and GasAPI Standard crown block drilling rig/oil drilling crown blocks/drilling rig crown blockoil Well Control System api 6a gate valves oil pipeline valvesAPI ZP series Rotary Table For Drilling Rig PartsAPI 5CT seamless casing and tubing for OCTGAPI Standard Centralizer for CasingINTELLIGENT ELECTRIC DRUM PUMPING UNITAPI Threading tubing Couplinghigh quality API 11B Anti-corrosion hollow &solid Sucker rodAPI Tubing Pump